Router 6040 Pro specs
The numbers behind Router 6040 Pro, and what they mean in a small South African workshop.
Specification
| Bed | 600 x 400 mm |
|---|---|
| Spindle | 1.5 to 2.2 kW class |
| Materials | MDF, acrylic, soft Al |
| Power | 220 V single phase |
| Care | Collet wipe after shift |
| Training | Layout leaf included |
| Footprint | About 1100 x 900 mm on stand |
| Collet range | ER11, 3.175 to 6 mm |
| Z clearance | About 80 mm under the gantry |
| Typical feeds | 1.5 to 3 m/min in MDF with a 6 mm two-flute |
What the numbers mean on the floor
Space. About 1100 x 900 mm for the machine on its stand, plus a working aisle of 800 mm on the loading side.
Power. Single phase 220 V on its own 16 A circuit. A small UPS keeps the controller alive through a short dip so you can park the head instead of losing the job.
Air and extraction. No compressed air needed for the base setup. Dust cuff runs to a shop vac or the Dust Booth S.
Questions to ask before you buy
- Ask for the actual Z clearance, not the brochure number with the spoilboard removed.
- Check that the stand is welded steel, not bolted angle that racks over time.
- Confirm ER11 collets and nuts are on the shelf locally, not only overseas.
Also see Router 6040 Pro overview, specs, layout and care. Questions go to cnc@cncpme.co.za.
